Category: Rack

100 channel Digital Delay Generator

GFT1000

up to 100 independent delay Channels
- 100 ps resolution (1ps resolution option)
- 25ps rms jitter
- 10 second range
Output pulse up to 6 V/50 Ω
Up to 1 Km beetween output pulses
Independent trigger rates for each chanel
Four triggers
- Three are repetitive from three internal generators
- One is single-shot from external input/puschbutton/software.
External Clocking up to 100 MHz
Controlled via Front panel, Ethernet, Internet (Web page)
Option:
- Channel ouput amplitude 10V/20V/32V
- 1ps delay resolution
- Channel optical output
- Extension to 2500 channels
- Synchrotron configuration
- Other form factor cPCI, PXI, Box

GFT1004

Four Independent Delay Channels (or ten in option)
- <1 ps delay resolution
- <10 ps jitter for internal triggered delays
- <25 ps jitter for external triggered delays
Adjustable output pulse up to 10 V, 1 ns rise time
Independent trigger rates for each channel
Controlled via Ethernet /Internet (web page) and front panel
Compact packaging: Rack 19″, 1U, 300 mm
Options:
- Extension to 8 or 10 channels
- Channel output (Amplitude/rise time) 6 V/5 ns or 20 V/3 ns or 32 V/ 3 ns

GFT1020

20 independent delay Channels
- 100 ps resolution (1ps resolution in option)
- 25 ps RMS jitter
- 10 second range
Output pulse 3 V to 6 V under 50 Ω
Independent trigger rates for each channel
Four triggers
- Three are repetitive from three internal synchronized generators
- One is single-shot from external input or puschbutton or software command
External Clocking up to 100 MHz
Gate input to inhibit quickly all outputs
Controlled via Front panel, Ethernet, Internet (Web page)
Option:
- Channel ouput amplitude 10 V or 20 V or 32 V under 50 Ω
- Optical channel output
- 1 ps delay resolution
- Extension to 40 channels

GFT1064

4 independent delay channels
100 ps delay resolution
50 ps channel to channel RMS jitter
50 MHz rate
Output pulse 1.5 to 5 V into 50 Ω, 1 ns rise time with variable control of width, polarity, burst count, amplitude, and MUX mode
Trigger for every channel may be repetitive or single from:
- Two independent inputs (with pre-scaler)
- Three synchronous programmable timers (0.01 Hz to 50 MHz)
- or command
Gate (or second trigger) input
External clocking up to 240 MHz (user programmable)
Controlled via Ethernet (USB in option)
Ultra-compact packaging and low power
Channel output amplitude option: 3 to 10 V or 15 to 50 V or LVDS level

GFT1620

20 independent delay channels
- 100 ps delay resolution
- 50 ps channel to channel RMS jitter
Output pulse 1.5 to 5 V into 50 Ω, with 1 ns rise time and independent control of pulse width, polarity, amplitude, burst and MUX mode
Up to 50 MHz trigger rate
6 triggers sources: two External with pre-scaler or three internal timers or one command
External clocking up to 240 MHz
Controlled via Ethernet or USB
Output pulse options: 10 V or 50 V or LVDS level